Industry News

If you have any enquires, do feel free to contact us. Thanks !

Get A Quote

What is a Ring Blower? How It Works and Applications?

By |2024-08-12T16:50:43+08:00August 12th, 2024|Industry News, News|

What is a Ring Blower? A ring blower, also known as a centrifugal blower, is a type of industrial fan that uses an impeller with backward-curved blades to move air or gases. It operates on the principle of centrifugal force, drawing in air or gases and expelling them radially outward through the housing. What are

Application of side channel blower in 3D printing

By |2024-08-06T09:53:13+08:00August 6th, 2024|Industry News, News|

The application of high-pressure side channel blowers in 3D printing is mainly reflected in ensuring the fixed processing objects, ‌ to ensure the stability and accuracy of the sucked products in the work. ‌ The 3D printer high pressure side channel blowers uses its high pressure function to fix the processed objects, ‌ to ensure

Single Stage Vs. Double Stage Regenerative Blowers and Vacuum Pumps

By |2024-08-05T14:25:22+08:00August 5th, 2024|Industry News, News|

GOORUI Regenerative blowers generate suction or blowing air for a wide variety of industrial applications. These turbo dynamic vacuum pumps contain a contact less, fast rotating impeller and are therefore wear and maintenance free. On both sides of the impeller there are two ring-shaped separate side channels along with the housing. The rotating impeller pulls

Regenerative Blower Advantages

By |2024-07-26T11:02:41+08:00July 26th, 2024|Industry News, News|

Energy efficiency Developing pressures higher than required for applications wastes energy. Regenerative blowers have been engineered to deliver the ideal pressure and flow for properly sized pneumatics at point of use. Low maintenance and high reliability Fewer moving parts reduce wear, tear, maintenance and downtime to promote sustained blower reliability. Unlike competing technologies incorporating necessary

What is the difference between CENTRIFUGAL BLOWER and SIDE CHANNEL BLOWER?

By |2024-07-15T14:55:06+08:00July 15th, 2024|Industry News, News|

GOORUI supplies side channel blowers (also known as regenerative blowers) that can sometimes be confused with centrifugal blowers. Centrifugal blowers and side channel blowers are both types of mechanical equipment used to transport air or other gases. Yet, it is important to understand their similarities and key differences to choose the right equipment for your

The reasons for blowers getting hot & Solutions

By |2024-03-18T14:40:39+08:00March 18th, 2024|Industry News, News|

The reasons for blowers getting hot & Solutions 1. Motor overload If the blower motor carries too much load, it will cause the motor to be overloaded, which in turn generates a large amount of heat, resulting in the motor getting hot. At this time, you need to check whether the rated power of the

Get a Catalogue & Quote