Goorui ring blowers plays an important role in the smelting process of steel and other metal materials. From ore to steelmaking, the main smelting processes, such as ore sintering, ironmaking and steelmaking, require ring blowers in all process flow of steel smelting.
Goorui ring blowers for Sintering
The ore for smelting needs to be sintered before smelting. The sintering machine is used for sintering, while the main exhaust side channel air blowers of flue gas and cooling ventilation ring blowers are used for sintering furnace.
Goorui ring blowers for Coke Oven Gas Conveyance
Coke is the main fuel and reducing agent for steel smelting, as well as the proppant and loosening agent for burden particles in blast furnace. After the gas in coke oven is extracted by ring blowers, part of it is used as coke oven fuel, part of it is sent to steel plant as fuel after pressurization, and the other part is used as other by-products.
Blast Furnace High Pressure Blower
In the process of pig iron smelting, a certain amount of combustion-supporting air (or oxygen) must be conveyed to the blast furnace by the blast furnace blower to increase the temperature in the furnace. In addition, it is necessary to send the burning air to the centrifugal ring blowers in the hot blast stove.
Oxygen to iron and steel industry lies in strengthening the smelting process. In steelmaking, it is used in oxygen top-blown converter steelmaking, oxygen bottom-blown converter steelmaking, open-hearth pool oxygen steelmaking, electric furnace oxygen steelmaking, etc.
Especially oxygen top-blown converter steelmaking has become a major way for the rapid development of iron and steel industry. Oxygen used in steelmaking is very large.
It is obtained by deep freezing from air using air separation equipment. Air compressor, oxygen compressor, heating blower, high pressure blower and turbine expander must be used in each set of oxygen making machine, which is commonly called “four oxygen making machines”.
Goorui ring blowers for Dust Removal of Converter Secondary Flue Gas
Converter secondary flue gas dedusting system refers to the collection and dedusting of flue gas at all dust-raising points besides the purification and recovery of converter flue gas. These include converter iron mixing, converter blowing, argon blowing station, hot metal slag picking station and hot metal tank inverting station.
The main features of the ring blowers used for flue gas dust removal are adjustable air intake, high-strength wear-resistant impeller, oil leakage-proof bearing box and joint-type axial adjusting door.
Goorui ring blowers for Iron Chemicals Furnace
In addition to the ring blowers used in iron and steel smelting process, the common iron-making furnaces (such as cupolas, oil furnaces and pulverized coal furnaces) in mechanical foundry factories need high-pressure blower to pressurize enough air to support combustion.
Our blower has been widely used to replace other brands throughout the world. If possible, we could quote the model based on your specific needs(airflow, pressure, vacuum).
If you are interested in any type of our blower, contact me anytime. my email is: service@goorui.com
