With the continuous development of economy, science and technology, foreign advanced technology and new technology are constantly introduced. High-pressure vortex blowers have been widely used in industrial equipment, equipment auxiliary equipment, civil equipment and other fields. Its main applications are as follows:
– The swimming pool equipment mainly uses high-pressure vortex blowers to inject air into the bathtub
The bathtub with high-pressure vortex blower will not inhale cold air like other bathtubs when it is in use, so that the pool water will be cooled, and the effect of complete hydrotherapy cannot be achieved. The cold air inhaled by the high-pressure vortex blowers passes through the air blower (air compression) and the hot air comes out. The bathtub achieves a hydrotherapy effect by blowing hot air into the water, and the flowing hot water relaxes the muscles and helps release the body’s natural pain reliever – endorphin. In addition to maintaining the heat of the water, the strength and location of the air injected into the water is another important factor that determines the effect of the spa, and this factor is determined by the model of the high-pressure vortex blowers.
– Application of high-pressure vortex blowers on textile machinery
Use the negative pressure of the high-pressure vortex blowers to separate the products produced by the loom from the water. This is a common dehydration method for textile machinery. When selecting a model, it is generally necessary to choose a waterproof and long high-pressure vortex blowers with a power of 0.4KW. In addition, this product can also absorb other impurities produced in the weaving process, improving product quality and work efficiency.
– Application of high-pressure vortex blowers in PCB industry
One embodiment is: the drying of circuit boards in the electronics industry uses high-pressure vortex blowers to blow off tiny dust and water droplets on the circuit boards, which is fast and clean with good results;
Second: Stir the electrolytic cell with the gas blown by the high-pressure vortex blowers to make the electrolyte circulate and drive away the attached water bubbles so that the electroplating is rapid and the effect is uniform.
– High-pressure vortex blowersare used in industrial vacuum cleaners
The industrial vacuum cleaner uses a high-pressure vortex blowers impeller to run at high speed, generating strong suction and pressure to form a partial vacuum in the dust collection chamber.
Under the action of suction and pressure, the air is discharged at high speed, and the air in the dust-absorbing part of the front end of the high-pressure vortex blowers continuously replenishes the air in the blower resulting in an instantaneous vacuum inside the vacuum cleaner, which forms a negative pressure brush, long connecting pipe, elbow, etc. The hose and hose connector enter the dust filter bag, and dust and other sundries remain in the dust filter bag. After the air is purified by the filter, it is discharged from the rear of the machine.
The high-pressure vortex blowers uses suction in the industrial vacuum cleaner to play the role of suction and vacuum, so that the air forms convection, and dust and other sundries are collected through the pipe.
– Special high-pressure vortex blowers for filling equipment
Before filling: the high-pressure vortex blower sucks away the water on the inner wall of the container to be filled, and at the same time, a relative vacuum is formed in the container, which is convenient for filling.
After filling: drying of labeled bottles. This machine is also composed of a high-pressure vortex blowers, which needs to be installed on the bottle conveying line for use. The bottle is first blown away by the high-pressure vortex blowers wind, and the drying is carried out synchronously to improve efficiency. . There is no need to install air volume heater equipment.
– High-pressure vortex blowers for packaging machinery
In the packaging machinery industry, the suction function of the high-pressure vortex blowers is mainly used. In the engineering of packaging products, the vacuum adsorption technology of high-pressure vortex blowers is used to fix products and assist in transportation and other functions. The case is the egg packaging industry.
– Special high-pressure vortex blowers for leather machinery
It is a special equipment used for finishing the grain surface of leather during the finishing process in the tanning process. The spray gun is controlled by computer and pneumatic. Realize the technological requirements of spraying with leather under the rotary spray gun and stopping spraying without leather. And the sprayed leather is automatically sent to the drying room for drying treatment, and the dried leather is cooled by cool wind to complete the whole processing process.
Application of high-pressure vortex blowers: The high-pressure vortex blowers forms a purification device, and the formed water curtain filter layer can take away the residual dust particles in the air, so the discharged gas is clean. The exhaust air volume of this machine matches the exhaust volume in the spray chamber. Even if the glass door of the spray chamber is not closed during operation, the dust and mist will not spread outward, so it can be called an environmentally friendly product. In addition, in the leather cutting system, the vacuum generated by the high-pressure fan is used to firmly fix the leather material on the cutting table to improve work efficiency.
– Special high-pressure vortex blowers for tunnel engineering
Dust and poisonous gas are produced in tunnels, mines and narrow fortification sites. High-pressure blowers use vacuum to suck away the harmful and explosive gas dust to reduce engineering accidents.
– Special high-pressure vortex blowers for central feeding system
The central feeding system adopts the high-pressure vortex blowers vacuum conveying method, and the plastic raw materials are transported from the storage tank to the central drying system through a centralized pipeline system, and then the dried raw materials are transported to each injection molding machine. The central conveying system adopts the design method of “one machine, one pipe” to ensure the stable operation of the whole system and no material blocking phenomenon. It is used with the central drying system, which can use dry air to transport the raw materials to prevent the dried raw materials from regaining moisture. At the same time, the conveying pipeline will be cleaned after each conveying cycle to ensure that there are no residual pellets in the pipeline. While avoiding the moisture resurgence of the raw material, it also ensures the consistency of the performance of the raw material added to the injection molding machine. Under the vacuum negative pressure of the high-pressure fan, the original dust in the raw material will be filtered out through the dust filtration system, which helps to improve the quality of the molded product.
– High-pressure vortex blowers for sewage treatment
Aeration method: When the microporous aeration plate is aerated, the film will bulge and expand the micropores of the film, and the aeration will start according to the ventilation. When the aeration is stopped, the micropores are closed and the film is tight on the substrate to prevent the sewage from infiltrating into the inside, resulting in the blockage of the pores. Therefore, the 1m high-performance air filter required by the previous microporous aeration head is not required.
